Anti-Jam Triple-Band Antenna with XF+ Channel-Split Filtering
Two-Element Controlled Reception Pattern Antenna for Jammed Environments
Triple-band GNSS antenna with L-band corrections: GPS L1/L2/L5, GLONASS, Galileo, BeiDou and NavIC, 37 dB gain and 2.5 dB noise figure.
Embedded Full-Band Antenna Covering Every GNSS Constellation
Robust Antenna for Autonomous Vehicles, Precision Agriculture, and More
1-to-2 GNSS and L-band signal splitter (1–2 GHz) with 1 dB insertion loss in an IP67 aluminium housing, to share one antenna between two receivers.
Full-Band Anti-Jam Antenna for Marine and Mission-Critical Positioning
Four-Element CRPA with eXtended Filtering for Hostile RF Environments
Low Elevation Angle Nulling Against Ground-Based Jammers
Dual-Band GNSS Antenna for Precision Positioning Across Multiple Constellations
Pre-filtered dual-band GNSS antenna for GPS L1/L2, GLONASS G1/G2, Galileo E1 and BeiDou B1, with 35 dB gain and 2.5 dB noise figure.
Tactical-grade GNSS/INS with a jamming- and spoofing-resilient receiver: 0.03° roll/pitch, 0.08° heading and 1 cm RTK; suspended mounting version.
Four-Element Controlled Reception Pattern Antenna for Contested Environments
Pre-Filtered Single-Band GNSS Antenna for Noisy RF Environments
Embedded Passive Triple-Band Antenna with L-Band Correction Support
Accutenna® Anti-Jam Single-Band Antenna for Precision Positioning
Accutenna® Anti-Jam Antenna with Dual-Feed Interference Rejection
Smart Power Splitter for Fault-Tolerant Performance in Critical Systems
Smart 1-to-2 GNSS signal splitter for high-availability systems, letting two receivers share one antenna across the full GNSS spectrum.
Embedded Triple-Band Antenna with eXtended Filtering
Triple-band GNSS helical antenna with L-band and XF filtering: GPS L1/L2/L5, GLONASS, Galileo, BeiDou and NavIC, 2.5 dB noise figure.
Dual-band GNSS helical antenna with L-band: GPS L1/L2, GLONASS, Galileo and BeiDou, 28 dB gain and 2 dB noise figure, for UAVs and compact platforms.
Multi-Band GNSS with RTK and IMU for Centimeter-Level Accuracy
Enhanced Signal Clarity with Advanced Filtering and Low Noise
40 dB inline RF amplifier for all GNSS and L-band signals (1200–1800 MHz) with a 2 dB noise figure in a waterproof housing, for long antenna cable runs.
25 dB inline amplifier for upper-band GNSS (1559–1610 MHz) with SAW filtering and a 2 dB noise figure, waterproof, for long antenna cable runs.
Bias-tee that injects 5 V DC into coax (0.5–3 GHz) with 1 dB insertion loss and up to 450 mA, IP67, for powering active GNSS antennas.
Tactical-grade GNSS/INS with a jamming- and spoofing-resilient receiver: 0.03° roll/pitch, 0.08° heading and 1 cm RTK; rigid mounting version.
Embedded dual-band GNSS and Iridium helical antenna: GPS/QZSS L1/L2, GLONASS, Galileo and BeiDou, 28 dB gain and 1.7 dB noise figure.
42 g dual-band GNSS and active Iridium helical antenna: GPS/QZSS L1/L2, GLONASS, Galileo and BeiDou, 28 dB gain and 1.7 dB noise figure.
38 g smart helical GNSS antenna with a u-blox F9 engine (L1/L5), XF filtering, 0.3° heading and 7 Hz output, for high-accuracy UAVs.
Smart GNSS antenna with a u-blox F9 engine (L1/L2), 10 mm RTK, L-band PointPerfect corrections and 0.3° heading, for precise positioning and heading.
Smart GNSS timing antenna with a 72-channel u-blox M8 engine, GPS, GLONASS, BeiDou and Galileo, RS-422 timepulse, for network synchronisation and tracking.
Dual-antenna GNSS compass board: 0.16° heading, multi-frequency GPS, GLONASS, BeiDou and Galileo, RTK and Atlas L-band, 10 Hz (20 Hz option).
Vector GNSS compass receiver for marine heading and positioning: 0.2° heading, RTK and Atlas L-band, GPS, GLONASS, BeiDou and Galileo, 10 Hz output.
Durable IP67 Design for Reliable GNSS Performance in Tough Environments
Hemisphere GNSS A631 GNSS Smart Antenna offers professional-level accuracy for a wide range of applications, including agriculture, marine, GIS, and mapping.
Vector GNSS smart antenna with 1.5° heading (0.75° optional) and 1.5° pitch/roll, GPS, GLONASS, BeiDou, Galileo and QZSS at 10 Hz, for marine and machine use.
Multi-frequency GNSS smart antenna with Athena RTK (8 mm + 1 ppm static) and Atlas L-band corrections, for survey, construction and machine control.
GNSS antenna for GPS L1, GLONASS G1, BeiDou B1, Galileo E1, SBAS and L-band, with 30 dB LNA gain and an aluminium base, for marine and machine use.
Hemisphere GNSS Vector VR500 GNSS Smart Antenna provides RTK-level precision and reliable heading for machine control and challenging applications.
Lightweight 40 g multi-frequency helical GNSS antenna for UAVs: GPS L1/L2, GLONASS, BeiDou, Galileo and L-band, 30 dB LNA and over 50 dBc out-of-band rejection.
Multi-frequency GNSS antenna (L1/L2/L5) with L-band, 30 dB LNA gain and a 5/8-inch mount, built for precise machine control.
Multi-frequency GNSS antenna (L1/L2/L5) with L-band, 30 dB LNA gain and a 5/8-inch mount, for land and marine positioning.
Multi-frequency GNSS antenna (L1/L2/L5) with L-band, 30 dB LNA gain, rugged Lexan radome and 1-inch mount, for precise RTK positioning.
Compact 0.38 kg multi-frequency GNSS antenna (L1/L2/L5) with L-band and 30 dB LNA gain, for construction survey, RTK and machine control.
GNSS antennas for GPS L1, GLONASS G1, BeiDou B1, Galileo E1, SBAS and L-band, 0.38 kg with a 5/8-inch mount, for precision positioning.