Skip to Content
  1. All products
  2. Inertial Navigation
  3. AHRS & MRU
  4. SBG Systems | Ekinox-A: Precise Motion & Attitude AHRS/MRU Solution
  5. AHRS & MRU
SBG Systems

Ekinox-A: Precise Motion & Attitude AHRS/MRU Solution

MEMS AHRS and MRU with 0.02° roll/pitch, 0.03° heading, 5 cm heave and under 10 µg accelerometer bias, for motion compensation and stabilisation.

SBG Systems | Ekinox-A: Precise Motion & Attitude AHRS/MRU Solution

SBG Systems | Ekinox-A: Precise Motion & Attitude AHRS/MRU Solution

MEMS AHRS and MRU with 0.02° roll/pitch, 0.03° heading, 5 cm heave and under 10 µg accelerometer bias, for motion compensation and stabilisation.

Contact Us
DatasheetSupport

Ekinox-A belongs to Ekinox series of high performance, MEMS-based Inertial Systems which achieve exceptional orientation and navigation performance in a compact form factor. As a Motion Reference Unit (MRU) or Attitude and Heading Reference System (AHRS), Ekinox-A, provides accurate roll and pitch in dynamic conditions as well as heave, surge and sway outputs. Connect it to an external GNSS receiver to benefit from absolute heading measurement and improved roll and pitch performance.

Ordering Options

Ordering options for SBG Systems' Ekinox-A:

  • CA-AEK-PWR-3M | 3 meters sealed power cable

  • CA-AEK-MAIN-ETH-2.5M | 2.5 meters unsealed main cable that supports Ethernet communications (Fischer/RJ45)

  • CA-AEK-MAIN-RS232-3M | 3 meters sealed main cable that supports Ethernet, CAN and RS-232 communications (Fischer/Wire Ended)

  • CA-AEK-AUX-3M | 3 meters sealed auxiliary cable that supports RS-232 and RS-422 communications

Other Cable Options:

  • CA-AEK-MAIN-RS422-3M | 3 meters sealed main cable that supports Ethernet, CAN and RS-422 communications

  • CA-AEK-SPLIT-MAIN-0.5M | Ekinox/Apogee MAIN Split Cable: 0.5 meter sealed main cable splitter that supports, Ethernet (RJ45), CAN (DB9), SYNC IN A (SMA) and PORTA (DB9 with RS232 + SYNC OUT)

Frequently Asked Questions

What is the Ekinox-A?

Ekinox-A belongs to Ekinox series of high performance, MEMS-based Inertial Systems which achieve exceptional orientation and navigation performance in a compact form factor. As a Motion Reference Unit (MRU) or Attitude and Heading Reference System (AHRS), Ekinox-A, provides accurate roll and pitch in dynamic conditions as well as heave, surge and sway outputs.

What is the difference between an AHRS and an IMU?

An IMU outputs raw angular rate and acceleration, while an AHRS such as the Ekinox-A runs onboard sensor fusion to output ready-to-use roll, pitch and heading — no external estimation algorithm required.

Where is the Ekinox-A available?

The Ekinox-A is available through Leo Drive in the following region: Turkey. For other regions, please contact Leo Drive.

How can I get the datasheet and technical documents for the Ekinox-A?

Please contact Leo Drive to request the datasheet, user manual and other technical documents for the Ekinox-A.

Explore More at Leo Drive

The Ekinox-A is part of the AHRS & Motion Reference Units range at Leo Drive. Browse all autonomous vehicle sensors and components, or talk to our engineering team about integration in your project.